Standard Molded Sample Sales

SCIVAX株式会社 > English > Mold Fabrications & Samples > Standard Molded Sample Sales

When considering moving ahead NIL technology for a given project, the large cost of mask fabrication can become a hurdle too high. SCIVAX low cost standard specification molds with the objective of enable speedy initial NIL process tests.

And also, we have been continuously providing large full-scale pattern molds (4″~12″) which have many inquiries of our prospective. Not only standard molded samples (listed below) but also custom samples can be processed with our service. Please feel free to inquire for the details.

Silicon Mold

From an ultrafine pattern with the leading-edge semiconductor technology, until a pattern of the μm order such as Micro Lens Arrays, a wide variety of NIL molds can be fabricated.

High Aspect Ratio Pillar Mold (MLP230/500)
Available Size: φ4″~φ12″

Mold for High Luminance (MLP230/MLH230)
Available Size: φ4″~φ12″

Mold for High Luminance (MLP230/MLH230)
Cross section

List of Standard Mold

L & S

Commodity Code Dimension of Structure (Spec) Effective Area Stamp Dimension Material Array
MALS250/500/500-30×30 Width:250nm, Height:500nm, Pitch:500nm □30mm □40mm Silicon(Si)
NALS250/500/500-30X30 Width:250nm, Height:500nm, Pitch:500nm □30mm □40mm Nickel(Ni)
MTLS1/1/2-50×50 Width:1μm, Height:1μm, Pitch:2μm □50mm □50mm Silicon(Si)
MTLS1/2/2-50×50 Width:1μm, Height:2μm, Pitch:2μm □50mm □50mm Silicon(Si)
MALS5/1/10-30×30 Width:5μm, Height:1μm, Pitch:10μm □30mm □40mm Silicon(Si)
NALS5/1/10-30×30 Width:5μm, Height:1μm, Pitch:10μm □30mm □40mm Nickel(Ni)
NALS500/250/1000-20×20 Width:500nm, Height:250nm, Pitch:1000nm □20mm □30mm Nickel(Ni)

Hole

Commodity Code Dimension of Structure Effective Area Stamp Dimension Material Array
MAH100/100/400-30X30 φ100nm, Depth:100nm, Pitch:400nm □30mm □40mm Silicon(Si) Square
MAH250/500/500-30×30 φ250nm, Depth:500nm, Pitch:500nm □30mm □40mm Silicon(Si) Hexagonal
MLH230/200/460-Φ120 φ230nm, Depth:200nm, Pitch:460nm Φ120mm Φ120mm Silicon(Si) Hexagonal
MAH300/300/600-30X30 φ300nm, Depth:300nm, Pitch:600nm □20mm □25mm Silicon(Si) Hexagonal
MAH300/600/600-30X30 φ300nm, Depth:600nm, Pitch:600nm □20mm □25mm Silicon(Si) Hexagonal
MAH300/600/800-30X30 φ300nm, Depth:600nm, Pitch:800nm □20mm □25mm Silicon(Si) Square
MTH500/500/1000 φ500nm, Depth:500nm, Pitch:1000nm □50mm □50mm Silicon(Si) Hexagonal
NAH2000/500/5000-30X30 φ2000nm, Depth:500nm, Pitch:5000nm □30mm □40mm Nickel(Ni) Square
MTH1.9/2.3/3-50×50 φ1.9μm, Depth2.3μm, Pitch3.0μm □50mm □50mm Silicon(Si) Hexagonal

Pillar

Commodity Code Dimension of Structure Effective Area Stamp Dimension Material Array
NAP100/100/400-30X30 φ100nm, Height:100nm, Pitch:400nm □30mm □40mm Nickel(Ni) Square
MLP230/500/460-Φ120 φ230nm, Height:500nm, Pitch:460nm Φ120mm Φ120mm Silicon(Si) Hexagonal
NAP230/100/460-30X30 φ230nm, Height:100nm, Pitch:460nm □30mm □40mm Nickel(Ni) Hexagonal
NAP230/200/340-30X30 φ230nmnm, Height:200nm, Pitch:340nm □30mm □40mm Nickel(Ni) Hexagonal
NAP230/200/460-30X30 φ230nm, Height:200nm, Pitch:460nm □30mm □40mm Nickel(Ni) Square
MLP230/200/460-Φ120 φ230nm, Height:200nm, Pitch:460nm Φ120mm Φ120mm Silicon(Si) Hexagonal
NAP230/200/690-30X30 φ230nmnm, Height:200nm, Pitch:690nm □30mm □40mm Nickel(Ni) Hexagonal
NAP230/200/690-30X30 φ230nmnm, Height:200nm, Pitch:690nm □30mm □40mm Nickel(Ni) Square
NAP250/500/500-30×30 φ250nm, Height:500nm, Pitch:500nm □30mm □40mm Nickel(Ni) Hexagonal
NAP250/250/1000-20×20 φ250nm, Height:250nm, Pitch:1000nm □20mm □30mm Nickel(Ni) Square
NAP270/200/530-30X30 φ270nm, Height:200nm, Pitch:530nm □30mm □40mm Nickel(Ni) Hexagonal
NAP300/300/600-20×20 φ300nm, Height:300nm, Pitch:600nm □20mm □25mm Nickel(Ni) Hexagonal
NAP300/600/600-30X30 φ300nm, Height:600nm, Pitch:600nm □20mm □25mm Nickel(Ni) Hexagonal
NAP300/600/800-30X30 φ300nm, Height:600nm, Pitch:800nm □20mm □25mm Nickel(Ni) Square
NAP310/200/620-30X30 φ310nm, Height:200nm, Pitch:620nm □30mm □40mm Nickel(Ni) Hexagonal
NAP400/200/600-30X30 φ400nm, Height:200nm, Pitch:600nm □30mm □40mm Nickel(Ni) Hexagonal
NAP400/200/600-30X30 φ400nm, Height:200nm, Pitch:600nm □30mm □40mm Nickel(Ni) Square
NAP400/400/600-30X30 φ400nm, Height:400nm, Pitch:600nm □30mm □40mm Nickel(Ni) Square
NAP500/250/1000-20×20 φ500nm, Height:250nm, Pitch:1000nm □20mm □30mm Nickel(Ni) Square
NAP600/400/800-30X30 φ600nm, Height:400nm, Pitch:800nm □30mm □40mm Nickel(Ni) Hexagonal
NAP600/400/800-30X30 φ600nm, Height:400nm, Pitch:800nm □30mm □40mm Nickel(Ni) Square
NAP2000/500/5000-30X30 φ2000nm, Height:500nm, Pitch:5000nm □30mm □40mm Nickel(Ni) Square

Plural

Commodity Code Dimension of Structure Effective Area Stamp Dimension Material Array
NA250/250/500-20×20
(PILLAR、LS)
φ250nm, Height:250nm, Pitch:500nm
Width:250 nm, Height:250nm, Pitch:500nm
□20mm □30mm Nickel(Ni) Square

Custom Molded Examples

According your requests, from evaluation to volume production, various custom molds can be can be fabricated. According to pattern size, SCIVAX uses 7 different mold processes for fabrication.

Compound Custom Mold

More than two patterns of your request can be fabricated onto a single mold.

Mold Material: Ni
Pattern: Pillar (picture in the right), L&S (picture in the left)
L&S: Width 250nm, Height 250nm, Pitch 500nm
Pillar: φ250nm, Height 250nm, Pitch 500nm

Low Cost NIL Mold

We can fabricate a mold according to your specification (Material: Si, Ni).

Pattern: L&S, Pillar, Hole, etc.
Pattern Size: 150nm~
Pattern Area: □10mm~□30mm
Material: Si, Ni

Line & Space

Hole Pattern and Pillar Pattern

Large-Area Custom Mold

Replication service is available for Ni electroformed mold.

Ni Electroformed Mold
(200nm Pillar, Height 500nm)
8″ Ni Electroformed Mold
(Replica Mold from φ200nm Pillar)

Ni electroformed replica mold can be fabricated from silicon mold.

Silicon mold (200nm Pillar, Height 500nm)

Silicon mold (Honeycomb, One side: 1μm, Wall-thickness 240nm)